Viewing Zone Properties; Adding Members To A Zone - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

Viewing zone properties

1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select an FC fabric from the Zoning Scope list.
4. Right-click the zone you want to review in the Zones list and select Properties.
5. Review the zone properties.
6. Click OK to close the Zone Properties dialog box.

Adding members to a zone

Use this procedure to add a member to a zone when the member is listed in the Potential Members
list of the Zone DB tab.
1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select an FC fabric from the Zoning Scope list.
4. Select one or more zones to which you want to add members in the Zones list. (Press SHIFT or
DCFM Enterprise User Manual
53-1001775-01
The Zoning dialog box displays.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
The Zone Properties dialog box displays.
Depending on what type of zone you selected, the following information is included in the zone
properties:
•
Zone Name—The name of the zone.
•
Zone Configs Containing This Zone—The number of zone configurations to which this zone
belongs.
•
Total Zone Members—The number of zone members in the selected zone.
•
Number of Aliases—The number of aliases in this zone.
•
Zone Members Contained by Aliases—The number of zone members in the selected alias.
•
Configure Status (TI Zone and Fabric OS only)—Whether or not the TI zone is enabled.
•
Configure Failover (TI Zone and Fabric OS only)—Whether or not the TI zone failover is
enabled.
•
Status (not applicable for TI zones)—The status of the selected zone.
The Zoning dialog box displays.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
If you want to show all the discovered fabrics in your fabric group in the Potential Members list,
right-click in the Potential Members list and select Display All.
CTRL and click each zone name to select more than one zone.)
Viewing zone properties
22
609