Brocade Communications Systems StoreFabric SN6500B User Manual page 1262

H
Database tables and fields
TABLE 122
Field
REMOTE_WWN
CDC
ADMIN_STATUS
CONTROL_L2_COS
DSCP_CONTROL
TRUNKING_ALGORITHM
EXTENDED_TUNNEL
VIRTUAL_SWITCH_ID
CIRCUIT_COUNT
MISMATCHED_CONFIG_DET
AILS
LAST_UPDATE
SLOT_NUMBER
FICON_ENABLED
TPERF_ENABLED
AUTH_KEY
CONNECTED_COUNT
TUNNEL_STATUS_STRING
COMPRESSION_MODE
TURBO_WRITE_ENABLED
TAPE_ACCELERATION_ENA
BLED
IPSEC_ENABLED
1214
FCIP_TUNNEL (Continued)
Definition
Configured WWN of the Remote Node.
CDC Flag.
Default value is 0.
Admin Status of the Tunnel.
Default value is 0.
Class of service as defined by IEEE 802.1p for tunnel.
Default value is -1.
DiffServe marking for control frame.
Default value is -1.
Trunking Algorithm.
Default value is -1.
Indicates if the tunnel is an Extended Tunnel (i.e. new
Tunnel type on the switch).
Default value is 0.
Refers to the virtual switch to which the tunnel record
belongs to.
The number of circuits configured on the tunnel.
Default value is 1.
Details of the reasons as to why the tunnel is down.
Last update time tells the time when the last update
to the database record happened.
SLOT_NUMBER on which the VE Port of the tunnel
exists.
Default value is 0.
Is Ficon enabled. Default: 0, Values: 0|1.
Default value is 0.
Is Tperf enabled. Default: 0, Values: 0|1.
Default value is 0.
This is the preshared-key to be used during IKE
authentication.
Active connections count.
Default value is 1.
Tunnel Status string value from switch for the tunnel.
Compression mode value (0,1,2,3).
Default value is 0.
Whether turbo write (fast write) is enabled or not
(0,1).
Default value is 0.
Whether turbo write (fast write) is enabled or not
(0,1).
Default value is 0.
Default value is 0.
Format
char
smallint
smallint
int
int
int
smallint
int
smallint
varchar
bigint
int
smallint
smallint
varchar
smallint
varchar
smallint
smallint
smallint
smallint
Brocade Network Advisor SAN User Manual
53-1002696-01
Size
64
2048
128
256