System Blocknetbiosdefault - Efficient Networks Router family Command Line Interface Manual

Chapter 4: System Commands
To see the current success rate values, use the
information about success rates and Dial Backup, see
Samples, and Success Rate" on page 6-13
Mgmt Class
Network (R/W)
Input Format
system backup successrate <percentage> [<group>]
Parameters
<percentage>
<minutes>
a
Integer, 0 - 99 (50)
b
Integer, 0 - 65535 (0)
Examples
The following command changes the success rate to 75% for addresses in group 0.
-> system backup successrate 75
The following command disables the pinging of addresses in group 1.
-> system backup successrate
Response
Command prompt.

system blocknetbiosdefault

The router can block all NetBIOS and NetBUI requests from being sent over the
WAN. This command sets the default value used when a remote router entry is
defined.
The command
remote router. To see the current NetBIOS default, use the
Mgmt Class
Security (R/W)
Page 4-26
a
Minimum success rate required during a ping test of the addresses in
the group.
b
Optional, number of a group.
remote blocknetbios
Efficient Networks
Command Line Interface Guide
system list
"Ping Interval, Number of
of the Technical Reference Guide.
0 1
can change the NetBIOS setting for a specific
®
Router family
command. For more
system list command.
Efficient Networks
®