Dmt Mode - Efficient Networks Router family Command Line Interface Manual

Chapter 7: WAN Interface Commands

dmt mode

Sets DMT operational mode. The dmt mode command can request one of three
modes: ANSI, no_Trellis_ANSI, and UAWG.
NOTE:
UAWG mode is becoming obsolete.
No Trellis encoding for T1.413 ANSI ADSL is only needed where auto-negotiation is
not supported for Trellis.
Mgmt Class
Network (R/W)
Input Format
dmt mode ansi | no_trellis_ansi | uawg
Parameters
ansi | no_trellis_ansi
Response
Command prompt.
Page 7-12
Selects the DMT mode used.
®
Efficient Networks Router family
Command Line Interface Guide
Efficient Networks
®