Ipsec Add - Efficient Networks Router family Command Line Interface Manual

®
Efficient Networks Router family
Command Line Interface Guide
IPSec Commands
The following commands allow you to define an IPSec connection without IKE. To
read about IPSec Security, see
NOTE:
If you define a tunnel using IPSec commands, the keys will remain static. This could
pose a security risk and is not recommended. Use of IKE for key management is
recommended.

ipsec add

Defines an IPSec security association (SA) name.
Mgmt Class
Security (R/W)
Input Format
ipsec add <saname>
Parameters
a
<saname>
a
ASCII string
b
To see the SA names in use, use the
Example
-> ipsec add show_rx
Response
Command prompt.
®
Efficient Networks
"IPSec (Internet Protocol Security)" on page 5-50.
Name for the new IPSec SA.
ipsec list
Chapter 12: IKE/IPsec Commands
b
command.
Page 12-45