Ike Peers Set Localidtype - Efficient Networks Router family Command Line Interface Manual

Chapter 12: IKE/IPsec Commands
Parameters
<aggressivemodeid>
<peername>
a
Dotted-decimal notation, ASCII string
b
ASCII string
c
To see the peer names, use the
Example
-> ike peers set localid test.efficient.com my_aggressive_peer
Response
Command prompt.

ike peers set localidtype

Sets the type of the local ID for the IKE peer connection. This command is used only
when aggressive mode has been selected by the
this peer name.
The local ID type must match the peer ID type on the other end of the connection. The
possible ID types are IP address, domain name, or e-mail address. For more
information, see
Mgmt Class
Security (R/W)
Input Format
ike peers set localidtype <ipaddr | domainname | email>
<peername>
Page 12-34
IP address
b
Name of the IKE peer whose local ID is specified.
ike peers list
"IKE Peer Commands" on page 5-56.
Efficient Networks
Command Line Interface Guide
a b
, domain name , or e-mail address.
command.
ike peers set mode
®
Router family
c
command for
®
Efficient Networks