®
Efficient Networks
Router family
Command Line Interface Guide
system snmpport
This command manages SNMP port access. It can:
•
Disable SNMP for this router (sets the HTTP port to 0).
•
Request the default SNMP port (161). This re-enables SNMP after it is
disabled.
•
Redefine the SNMP port.
NOTE:
This command is functionally equivalent to the
NOTE:
This command requires a
To see the current setting, use the command
"Controlling Remote Management" on page 5-15.
Mgmt Class
Network (R/W)
Input Format
system snmpport
®
Efficient Networks
save
and
reboot
to take effect.
default | disabled | <port>
Chapter 4: System Commands
snmp snmpport
command.
system
list. For more information, see
Page 4-53