Ike Peers Set Address - Efficient Networks Router family Command Line Interface Manual

Chapter 12: IKE/IPsec Commands
Response
Typical response:
-> ike peers list
IKE Peers:
IKE Peers:
my_aggresive_peer
IP address = 0.0.0.0
preshared secret = "confidential_hushhush"
aggressive, peer id = example.efficient.com (Domain name)
my_main_peer
TP address = 1.2.3.4
preshared secret = "Shipsailsatmidnight"
main mode

ike peers set address

Sets the IP address of the other endpoint of the secure IKE peer connection. The
address specified depends on the mode of the peer connection, which can be either
main mode or aggressive mode. (see
If the mode is main mode, the other endpoint of the peer connection is constant, and
you specify its IP address.
If the mode is aggressive mode, one end of the connection, the gateway, has a fixed
IP address. The other end, the client, has a changing address. When configuring the
client, set the peer IP address to the fixed gateway address. When configuring the
gateway for an aggressive mode connection, set the peer IP address to 0.0.0.0.
Mgmt Class
Security (R/W)
Input Format
ike peers set address <ipaddress> <peername>
Page 12-32
local peer id = test.efficient.com (Domain name)
Efficient Networks
Command Line Interface Guide
"IKE Management" on page
®
Router family
5-52.)
®
Efficient Networks