Ike Proposals Set Dh_Group - Efficient Networks Router family Command Line Interface Manual

®
Efficient Networks Router family
Command Line Interface Guide

ike proposals set dh_group

Sets the IKE proposal parameter that specifies the Diffie-Hellman (DH) key
generation group used (no group or group 1 or 2). See
page 5-58.
Mgmt Class
Security (R/W)
Input Format
ike proposals set dh_group <none | 1 | 2> <proposalname>
Parameters
Choose one of the following:
none
1
2
<proposalname>
a
ASCII string
b
To see the proposal names in use, use the
Example
-> ike proposals set dh_group 2 my_ike_proposal
Response
Command prompt.
®
Efficient Networks
No DH group is used.
Use DH group 1.
Use DH group 2.
a
Name of the IKE proposal to which the DH group parameter is
b
added.
ike proposals list
Chapter 12: IKE/IPsec Commands
"IKE Proposal Commands" on
command.
Page 12-41