Chapter 4: System Commands
system wan2wanforwarding
Allows management of WAN-to-WAN forwarding of data from one WAN link to
another.
For example, an employee uses the router at home to access both a company
network and the Internet at the same time. To prevent the passing of company
information to the Internet, WAN-to-WAN forwarding should be disabled.
To see the current setting for WAN to WAN forwarding, use the command
This system wan2wanforwarding command complements the
onewandialup
one remote location at a time.
Mgmt Class
Network (R/W)
Input Format
system wan2wanforwarding on | of
Parameters
on
off
Response
Command prompt.
Page 4-68
command. That command allows you to limit WAN connections to just
Allows data to be forwarded from one WAN link to another WAN link.
Stops data from being forwarded from one WAN link to another WAN
link.
®
Efficient Networks
Router family
Command Line Interface Guide
system
system
Efficient Networks
list.
®