Shdsl Commands - Efficient Networks Router family Command Line Interface Manual

Chapter 7: WAN Interface Commands

SHDSL Commands

The commands in this section are used to manage the WAN link for a G.shdsl router.
The SHDSL commands found in this section include:
Command
shdsl ?
shdsl annex
shdsl list
shdsl margin
shdsl ratemode
shdsl restart
shdsl save
shdsl speed
shdsl stats
shdsl terminal
shdsl ver
Page 7-36
Table 7-10: SHDSL Command Listing
Lists the supported SHDSL keywords.
Selects annex A or annex B of the G.shdsl standard.
Lists the current configuration of the G.shdsl interface.
Specifies the acceptable noise margin in decibels.
Selects adaptive or fixed rate mode.
Restarts the G.shdsl WAN interface.
Saves SHDSL configuration changes across restarts
and reboots.
Manages the speed of the SHDSL line.
Displays and/or clears SHDSL statistics.
Displays and/or changes the router's status as CO or
CPE.
Displays the G.shdsl version level of the modem firm-
ware.
Efficient Networks
Command Line Interface Guide
Function
®
Router family
®
Efficient Networks