Frame Commands; Frame - Efficient Networks Router family Command Line Interface Manual

®
Efficient Networks Router family
Command Line Interface Guide

Frame Commands

The following commands are used to manage a frame relay router's WAN interface.
The Frame Relay commands found in this section include:
Command

frame ?

frame cmpplay
frame lmi
frame stats
frame voice
frame ?
Lists the supported frame keywords. To see the syntax for a command, enter the
command followed by a ?.
Mgmt Class
Network (R)
Input Format
frame ?
Parameters
None
Response
Lists the supported frame relay commands and keywords and a brief description of
their function.
®
Efficient Networks
Table 7-5: Frame Relay Command Listing
Lists the supported frame keywords.
Selects activation in routing or bridge mode. This com-
mand is applicable only when the router is configured
using Copper Mountain Plug & Play.
Turns frame LMI either on or off.
Displays frame relay statistics.
Displays the voice DLCI for voice routers.
Chapter 7: WAN Interface Commands
Function
Page 7-17