Sdsl Terminal - Efficient Networks Router family Command Line Interface Manual

®
Efficient Networks Router family
Command Line Interface Guide

sdsl terminal

Displays and/or changes the router's status as CO or CPE. The router is, by default,
configured as Customer Premises Equipment (CPE). Use this command if to
configure the router as Central Office equipment (CO).
Mgmt Class
Network (R/W)
Input Format
sdsl terminal [cpe | co]
Parameters
***
cpe
co
Response
Terminal operation is displayed:
-> sdsl terminal
Customer Premises
®
Efficient Networks
When entered with no parameters, the current mode is displayed.
Sets the terminal operation mode to CPE.
Sets the terminal operation mode to CO.
Chapter 7: WAN Interface Commands
Page 7-35