System Backup Stability; System Backup Successrate - Efficient Networks Router family Command Line Interface Manual

®
Efficient Networks Router family
Command Line Interface Guide

system backup stability

Changes the Dial Backup stability period. The stability period guards against frequent
switching back and forth between the DSL link and the backup port. For more
information about the Dial Backup stability period, see
of the Technical Reference Guide.
To see the current stability value, use the
Mgmt Class
Network (R/W)
Input Format
system backup stability <minutes>
Parameters
<minutes>
a
Integer, 1 - 60 (3)
Examples
The following command changes the stability period to 5 minutes.
-> system backup stability 5
Response
Command prompt.

system backup successrate

Changes the minimum success rate required for a group of pinged addresses. If the
success rate is less than the minimum, the DSL link is assumed to have failed and a
switchover to the backup is performed.
NOTE:
If you change the success rate to 0, you disable pinging for that group of addresses.
NOTE:
A minimum success rate of 100% is not recommended; this would require a reply
from every ping sent.
®
Efficient Networks
a
Number of minutes in the stability period.
Chapter 4: System Commands
"Stability Period" on page 6-11
system list command.
Page 4-25