Remote Listiproutes - Efficient Networks Router family Command Line Interface Manual

®
Efficient Networks Router family
Command Line Interface Guide

remote listiproutes

Lists IP information for a remote router or, if the router name is omitted, for all routers
in the remote router database. The IP information includes all network or station IP
addresses defined for the LAN connected beyond the remote router.
This command lists all routes defined for the remote router, including those defined in
the default routing table and in any virtual routing tables.
Mgmt Class
Network (R)
Input Format
remote listiproutes <remotename>
Parameters
<remotename>
a
ASCII string
Response
The following example command response lists routing information for remote router
HQ. It lists five routes that use HQ, the first four are in the default routing table and the
fifth is in virtual routing table FRANCISCO. <remotename> parameter:
-> rem listiproutes hq
IP INFORMATION FOR <HQ>
Send IP RIP to this dest............. no
Send IP default route if known..... no
Receive IP RIP from this dest........ rip-1 compatible
Receive IP default route by RIP.... no
Keep this IP destination private..... yes
Total IP remote routes............... 5
®
Efficient Networks
a
Name of the remote router.
192.168.210.0/255.255.255.0/1
10.0.0.0/255.0.0.0/1
172.16.0.0/255.240.0.0/1
192.168.0.0/255.255.0.0/1
10.1.2.0/255.255.255.0/1 through <FRANCISCO>
Chapter 6: Remote Commands
Page 6-37