Voice Commands - Efficient Networks Router family Command Line Interface Manual

®
Efficient Networks Router family
Command Line Interface Guide
The commands in this section are used to manage the voice functions of integrated
access devices (IADs). The commands available on the command line will vary based
on the voice gateway configuration. The voice commands found in this section
include:
Command
dsp ? / voice ?
dsp ecode
dsp jitter
dsp provision
dsp save
dsp vr
voice l2clear
voice l2stats
voice profile
voice refreshcas
®
Efficient Networks
CHAPTER 13
Table 13-1: Voice Command Listing
Lists the top-level voice or dsp commands and
keywords and a brief description of their function.
Deletes the IP address of the entry in the Address
Resolution Protocol (ARP) table.
Lists ARP table entries.
Lists the root bridge, and indicates whether the
mode is learning, listening, or forwarding.
Lists the contents of the bridge table.
Displays the current voice rate and encoding type.
Clears the L2 control channel statistics.
Displays the L2 control channel statistics.
Dials a remote router.
Displays or changes the current date on the rout-
er's clock.
Chapter 13: Voice Commands
CHAPTER 13

VOICE COMMANDS

Function
Page 13-1