Table of Contents
Advertisement
®
Efficient Networks
Router family
Command Line Interface Guide
The following DHCP (Dynamic Host Configuration Protocol) commands allow you to:
•
Enable and disable subnetworks and client leases.
•
Add subnetworks and client leases.
•
Set the lease time.
•
Change client leases manually.
•
Set option values globally, for a subnetwork, or for a client lease.
•
Enable/disable BootP.
•
Use BootP to specify the boot server.
•
Define option types.
The DHCP commands described in this section are included in
Command
process, see
Technical Reference Guide.
Command
dhcp ?
dhcp add
dhcp addrelay
dhcp bootp allow
dhcp bootp disallow
dhcp bootp file
®
Efficient Networks
Listing". To read about DHCP concepts and the DHCP configuration
"DHCP (Dynamic Host Configuration Protocol)" on page 4-2
Table 8-1: DHCP Command Listing
Lists the supported DHCP keywords.
Provides one of three types of DHCP definitions:
subnetwork, client lease, or option type.
Adds an address to the DHCP relay list.
Allows a BootP request to be processed for a par-
ticular client or subnet.
Denies processing of a BootP request for a partic-
ular client or subnet.
Specifies the boot file name (kernel) and the sub-
net to which it applies.
Chapter 8: DHCP Commands
DHCP COMMANDS
CHAPTER 8
Function
CHAPTER 8
Table 8-1, "DHCP
of the
Page 8-1
Advertisement
Table of Contents
