Remote Commands - Efficient Networks Router family Command Line Interface Manual

®
Efficient Networks Router family
Command Line Interface Guide
The commands in this section begin with the word remote. The commands allow you
to add, delete, and modify remote routers to which the target router can connect.
Remote router information that can be configured includes:
• PVC numbers
• Phone numbers
• CallerID phone numbers
• Call management
• Bandwidth management
• Security authentication protocols and passwords
• WAN IP/ IPX addresses
• IP routes
• IPX routes and SAPS
• Remote bridging addresses and bridging control
• Host mapping
The remote commands found in this section include:
Command
remote ?
remote add
remote addbridge
remote addhostmapping
®
Efficient Networks

REMOTE COMMANDS

CHAPTER 6
Table 6-1: Remote Command Listing
Lists the supported remote keywords.
Adds a remote router entry into the remote router data-
base.
Defines the remote router entry as the default bridging
destination for outbound bridging.
Remaps a range of local LAN IP addresses to a range
of public IP addresses on a per-remote-router basis.
Chapter 6: Remote Commands
CHAPTER 6
Function
Page 6-1