Eth Vrrp Clear Password - Efficient Networks Router family Command Line Interface Manual

®
Efficient Networks Router family
Command Line Interface Guide

eth vrrp clear password

Clears the password in a VRRP attribute record for the VRID (virtual router ID). To
see the current password, use the command
the command
page 6-16
NOTE:
If the VRRP attribute record has no password, no VRRP authentication is performed.
NOTE:
If you clear the password for one VRRP router, you must clear the password for every
router for that VRID on the LAN. For example, if VRID 7 is defined in routers A, B, and
C in the LAN and you clear the password for router A, you must clear the password for
routers B and C as well.
NOTE:
This command takes effect immediately, but changes must saved if it is to persist after
a restart the interface or reboot of the router.
Mgmt Class
Network (R/W)
Input Format
eth vrrp clear password <vrid> [<port#>]
Parameters
a
<vrid>
b
<port#>
a
Integer, 1 - 255
b
The default is 0; the parameter may be omitted if the router has only one port.
Example
This command example clears the password for VRID 7 using default port 0.
-> eth clear password 7
Response
Command prompt.
®
Efficient Networks
eth vrrp set password. For more information,see
of the Technical Reference Guide.
Virtual router ID.
Physical Ethernet interface (port) number.
Chapter 5: Ethernet Interface Commands
eth vrrp list. To set a new password, use
"VRRP Backup" on
Page 5-41