Remote Setpasswd; Remote Setphone - Efficient Networks Router family Command Line Interface Manual

Chapter 6: Remote Commands
Parameters
<password>
<remotename>
a
ASCII string
b
The name is case-sensitive and its maximum length is 255 characters.
Response
Command prompt.

remote setpasswd

Sets the CHAP or PAP authentication password that is used when the remote router
establishes a connection or is challenged by the target router.
Mgmt Class
Security (R/W)
Input Format
remote setpasswd <password> <remotename>
Parameters
<password>
<remotename>
a
ASCII string
b
The password is case-sensitive and its maximum length is 40 characters.
Response
Command prompt.

remote setphone

Specifies the phone number to be used for the dial on demand (DOD) connection,
that is, a connection where the link goes up and down. These links include those for
ISDN, L2TP tunnels, IPSec tunnels, and dial backup.
For dial backup, the phone number is used when dialing out using the backup V.90
modem connected to the console port. You may specify both a primary number and
an alternative phone number. For more information on the Dial Backup option, see
"Dial Backup" on page 6-7.
Page 6-56
a,b
System name of the target router.
a
Name of the remote router.
a,b
Authentication password of the remote router.
a
Name of the remote router.
®
Efficient Networks Router family
Command Line Interface Guide
Efficient Networks
®