System; System Addbootpserver - Efficient Networks Router family Command Line Interface Manual

®
Efficient Networks Router family
Command Line Interface Guide

system ?

Lists the supported keywords. To see the syntax for a command, enter the command
followed by a ?.
Mgmt Class
All (R)
Input Format
system ?
Parameters
None
Response
A listing of all the supported system commands and keywords with a brief description
of their function.

system addbootpserver

Adds an address to the BootP server list. (The BootP server list is also the DHCP
relay list.)
While the BootP server list has at least one address, the router disables its own
DHCP server and, instead, forwards all DHCP/BootP requests to all servers in the list.
It forwards every reply received from any of the servers in the list to the appropriate
LAN. To read about BootP service, see
Reference Guide.
Addresses can also be added to the list using the
remove an address from the list, use the
To see the current BootP server address, enter the command
system addbootpserver
the command
Mgmt Class
Network (R/W)
Input Format
system addbootpserver <ipaddr>
®
Efficient Networks
with no parameters. To remove a BootPserver address, use
dhcp delrelay or system
Chapter 4: System Commands
"BootP Service" on page 4-15
dhcp addrelay
dhcp delrelay command.
delbootpserver.
of the Technical
command. To
dhcp addrelay or
Page 4-5