System Addhostmapping - Efficient Networks Router family Command Line Interface Manual

®
Efficient Networks Router family
Command Line Interface Guide

system addhostmapping

Remaps a range of local-LAN IP addresses to a range of public IP addresses on a
system-wide basis. These local addresses are mapped one-to-one to the public
addresses.
NOTE:
The range of public IP addresses is defined by <first public addr> only. The
rest of the range is computed automatically (from <first public addr> to
<first public addr> + number of addresses remapped - 1) inclusive.
Automatic SNTP requests are generated if the system needs to get the time. You can
specify an SNTP server using the command
command
Mgmt Class
Network (R/W)
Input Format
system addhostmapping <first private addr>
<second private addr> <first public addr>
Parameters
<first private addr>
<second private addr>
<first public addr>
a
Dotted-decimal notation
Response
Command prompt.
®
Efficient Networks
sntp offset.
a
First IP address in the range of IP addresses to be
remapped.
a
Last address in the range of IP addresses to be
remapped.
a
Last address in the range of IP addresses to be
remapped.
Chapter 4: System Commands
sntp server and a UTC offset with the
Page 4-7