Snmp Commands - Efficient Networks Router family Command Line Interface Manual

®
Efficient Networks Router family
Command Line Interface Guide
This section contains SNMP command descriptions. For a complete discussion of
SNMP, see
The SNMP commands found in this section include:
Command
snmp ?
snmp addsnmpfilter
snmp addtrapdest
snmp community
snmp delsnmpfilter
snmp deltrapdest
snmp disablesnmpif
snmp enablesnmpif
snmp settrapenable
snmp snmppasswd
snmp snmpport
®
Efficient Networks
"SNMP" on page 7-2.
Table 17-1: SNMP Command Listing
Lists the supported SNMP keywords and com-
mands.
Validates SNMP clients by defining a range of IP
addresses that are allowed to access the router via
SNMP. Same function as
Adds an SNMP Trap manager by IP address.
Sets the SNMP community to which the router be-
longs.
Deletes the specified SNMP client range. Same
function as
Deletes a SNMP Trap manager by IP address.
Disables SNMP access from the specified inter-
face.
Enables SNMP access from the specified inter-
face.
Enables or disables transmission of unsolicited
trap event messages to trap destinations.
Sets an authentication password for an SNMP
Manager.
Manages SNMP port access. Same function as
system snmpport
Chapter 17: SNMP Commands

SNMP COMMANDS

CHAPTER 17
Function
system addsnmpfilter
.
system delsnmpfilter
.
CHAPTER 17
.
Page 17-1