System Securemode List; System Securemode Set - Efficient Networks Router family Command Line Interface Manual

®
Efficient Networks Router family
Command Line Interface Guide
Response
Command prompt.

system securemode list

Displays the current secure mode configuration values and the number of concurrent
Telnet and SSH sessions allowed.
Mgmt Class
Security (R)
Input Format
system securemode list
Parameters
None
Response
A typical response is shown below.
Secure Mode is currently "ENABLED".
WAN interface is currently "UN-TRUSTED".
LAN interface is currently "TRUSTED".
System CLI limit set to 7.

system securemode set

Enables and disables secure mode. When secure mode is enabled, management
access of the system is allowed only through secure channels for untrusted
interfaces. For more information, refer to
Technical Reference Guide.
Mgmt Class
Security (R/W)
Input Format
system securemode set <enable | disable>
®
Efficient Networks
Chapter 4: System Commands
"Secure Mode Access" on page 5-18 of the
Page 4-47