System List - Efficient Networks Router family Command Line Interface Manual

®
Efficient Networks Router family
Command Line Interface Guide

system list

Lists the system settings for the target router.
Mgmt Class
Network (R)
Input Format
system list
Parameters
None
Response
The following is an example of a typical response.
-> system list
GENERAL INFORMATION FOR <SOHO>
System started on.............. 9/8/2000 at 13:29
Authentication override........ none
WAN to WAN Forwarding.......... no
Block NetBIOS Default.......... no
BOOTP/DHCP Server address...... none
Telnet Port.................... default (23)
systems...done.
Telnet Clients................. all
SNMP Port...................... default (161)
systems...done.
SNMP Clients................... all
HTTP Port...................... default (80)
HTTP Clients................... all
Syslog Port.................... default (514)
Allowed Syslog Servers......... all
Default Syslog Servers......... none
System message:
Security timer................. 30 minutes
One WAN Dial Up................ no
Management feature............. 0
Rip timer...................... 45
Backup......................... no (no valid remote profile is
enabled)
Retry Interval In Minutes...... 30
Stability Interval In Minutes.... 3
®
Efficient Networks
Chapter 4: System Commands
file systems...done.
file systems...done.
file systems...done.
file systems...done.
file
file
file systems...done.
Page 4-39