Exit; Ifs - Efficient Networks Router family Command Line Interface Manual

Chapter 2: Status Commands
Response
Command prompt.
NOTE:
There is a time lag between the response issued by the erase command and the time
that the data is actually deleted from FLASH memory. To commit the changes to
FLASH memory, issue a sync command after an erase command before powering off
the router.

exit

Has the same function as logout, but will disconnect an active Telnet session.
Mgmt Class
All (R)
Input Format
exit
Parameters
None
Response
Command prompt.

ifs

Lists the communication interfaces installed in the router and the status of the
interfaces.
Mgmt Class
Voice (R), Network (R)
Input Format
ifs
Parameters
None
Page 2-10
®
Efficient Networks Router family
Command Line Interface Guide
Efficient Networks
®