Date - Efficient Networks Router family Command Line Interface Manual

Chapter 2: Status Commands

date

Displays or changes the current date on the router's clock. To change the current
time, use the
Automatic SNTP requests are generated if the system needs to get the time. You can
specify an SNTP server using the command sntp server () and a UTC offset with the
sntp offset
To see the current date and time on the router clock, enter
Mgmt Class
All (R/W)
Input Format
date <mm/dd/yy>
Parameters
a
<mm>
b
<dd>
c
<yy>
a
Integer 1-12
b
Integer 1-31
c
Integer, indicating a year from 1968 through 2034. Thus, 1/1/4 is January 1, 2004, 1/1/33 is January
1, 2033, and 1/1/78 is January 1, 1978.
Response
Display when date is entered with no parameters.
-> date
BootTime:
Current time:
Display when date is entered with parameters.
-> date 7/1/1
Time set to UTC-420, 7/1/2001 at 15:59:29
Time adjusted for (-) 0 days 0 hours 10 minutes 13 seconds
Page 2-8
time command.
command.
Month
Day
Year
7/1/2001 at 15:42:42
7/1/2001 at 15:49:16
®
Efficient Networks Router family
Command Line Interface Guide
date with no parameters:
Efficient Networks
®