System Addudprelay - Efficient Networks Router family Command Line Interface Manual

Chapter 4: System Commands

system addudprelay

Create a UDP port range for packet forwarding. You can specify a port range from 0 to
65535; however, 137 to 139 are reserved for NetBIOS ports.
NOTE:
Overlap of UDP ports is not allowed.
Mgmt Class
Network (R/W)
Input Format
system addudprelay <ipaddr> <first port>|all [<last port>]
Parameters
a
<ipaddr>
<first port>
all
<last port>
a
Dotted-decimal notation
b
Integer, see description above for port range.
Response
Command prompt.
Page 4-16
IP address of the server to which the UDP packet will be for-
warded.
b
First port in the UDP port range to be created.
Incorporates all the available UDP ports in the new range.
b
Last port in the UDP port range to be created.
®
Efficient Networks Router family
Command Line Interface Guide
Efficient Networks
®