Switch ?; Switch Agetime - Efficient Networks Router family Command Line Interface Manual

Chapter 21: Switch Commands

switch ?

Lists the supported Switch commands and keywords. To see the syntax for a
command, enter the command followed by a ? or help.
Mgmt Class
Network (R)
Input Format
switch ? | help
Parameters
None
Response
Lists the supported Switch commands and a brief description of their function.

switch agetime

Specifies the aging time of the switch. When age time expires the port-MAC address
entry will be removed from the table containing this information.
Mgmt Class
Network (R/W)
Input Format
switch agetime <seconds>
Parameters
***
<seconds>
1
Integer, 10-1,000,000 (300)
Response
Command prompt.
Page 21-2
When the command is entered with no parameter, the current age time
value displayed. If no age time has been specified, the valid range is
displayed.
1
Specifies the switch aging time. Aging time can be disabled by entering
a value of .
'0'
®
Efficient Networks Router family
Command Line Interface Guide
Efficient Networks
®