Firewall Modify - Efficient Networks Router family Command Line Interface Manual

Chapter 18: Stateful Firewall Commands
Command entered with the optional allow parameter.
-> firewall list allow
# Begin rules for firewall allow list
1. firewall allow -a NNTP -sa 10.0.0.1 -c 0 -q -d in
2. firewall allow -p TCP -sp 20:21 -c 0 -q -d in
3. firewall allow -p TCP -sp 23 -c 0 -q -d in
4. firewall allow -a SMTP -sa 192.168.113.254 -c 0 -q -d in
# End rules for firewall allow list
Response
See examples above.

firewall modify

Allows modification of an existing firewall rule.
NOTE:
If a firewall rule is modified to deny something that was previously allowed by a
firewall allow rule, the change will only apply to subsequent sessions; current
sessions will not be effected. When modifying a rule to allow what was previously
denied, the changes will be in effect for current sessions.
Mgmt Class
Security (R/W)
Input Format
firewall modify <allow | deny> <number> <parameter>
Parameters
The following identifies the firewall rule to be modified.
allow | deny
Identifies the rules list of which the rule to be modified belongs.
<number>
Rule number (of the specified rules list) to be modified.
a
Integer
Page 18-12
a
®
Efficient Networks Router family
Command Line Interface Guide
Efficient Networks
®