Ike Peers Set Localid - Efficient Networks Router family Command Line Interface Manual

®
Efficient Networks Router family
Command Line Interface Guide
Parameters
<ipaddress>
<peername>
a
Dotted-decimal notation
b
ASCII string
c
To see the peer names, use the
Example
-> ike peers set address 0.0.0.0 my_aggressive_peer
Response
Command prompt.

ike peers set localid

Sets the local ID for the IKE peer connection. This command is used when aggressive
mode has been selected by the
The local ID must match the peer ID on the other end of the connection. The local ID
can be an IP address, domain name, or e-mail address as specified by the
set localidtype
5-56.
Mgmt Class
Security (R/W)
Input Format
ike peers set localid <aggressivemodeid> <peername>
®
Efficient Networks
a
IP address.
b
Name of the IKE peer whose address is specified.
ike peers list
ike peers set mode
command. For more information, see
Chapter 12: IKE/IPsec Commands
command.
command for this peer name.
"IKE Peer Commands" on page
c
ike peers
Page 12-33