Eth Ipx Addr; Eth Ipx Disable - Efficient Networks Router family Command Line Interface Manual

®
Efficient Networks Router family
Command Line Interface Guide
Parameters
a
<vrid>
<interface>
a
Integer, 1 - 255
b
To specify a logical interface other than 0:0, specify both the port number (0 or 1) and the logical
interface number using the format <port #>:<logical #> (for example, 0:1).
Example
This command example assigns VRID 7 to the logical Ethernet interface 0:1.
-> eth ip vrid 7 0:1
This command example clears the VRRP interface designation from interface 0:1.
-> eth ip vrid 0 0:1
Response
Command prompt.

eth ipx addr

Sets the IPX network number for the Ethernet LAN connection.
Mgmt Class
Network (R/W)
Input Format
eth ipx addr <ipxnet> [port#]
Parameters
a
<ipxnet>
b
<port>
a
8 hexadecimal characters.
b
Integer, 0, 1 or it may be omitted.
Response
Command prompt.

eth ipx disable

Disables IPX routing across the Ethernet LAN. This acts as a master switch allowing
you to disable IPX routing for testing or control purposes.
®
Efficient Networks
Virtual route ID.
b
Ethernet interface. The default value is 0:0.
IPX network number.
Port number of the Ethernet LAN.
Chapter 5: Ethernet Interface Commands
Page 5-33