Ike Ipsec Policies Set Source - Efficient Networks Router family Command Line Interface Manual

®
Efficient Networks Router family
Command Line Interface Guide

ike ipsec policies set source

Defines a source filtering parameter value for the policy. The source parameter
requires the data come from the specified source IP address and mask. The source is
the device or network that sent the packet, not the router that routes the packet.
Mgmt Class
Security (R/W)
Input Format
ike ipsec policies set source <ipaddress> <ipmask>
<policyname>
Parameters
<ipaddress>
a
<ipmask>
<policyname>
a
Dotted-decimal notation
b
ASCII string
c
To see the policy names, use the
Example
-> ike ipsec policies set source 192.168.16.0 255.255.255.0 mypolicy
Response
Command prompt.
®
Efficient Networks
a
IP address allowed to be the source of the data
IP network mask.
b
Name of the IPsec policy to which the source parameter value
c
is added.
ike ipsec policies list
Chapter 12: IKE/IPsec Commands
command.
Page 12-19