Shdsl Terminal - Efficient Networks Router family Command Line Interface Manual

Chapter 7: WAN Interface Commands

shdsl terminal

Displays and/or changes the router's designation as CO (Central Office) or CPE
(Customer Premises Equipment).
By default, the router is assumed to be CPE. Use this command if the router is to be
used as CO.
Mgmt Class
Network (R/W)
Input Format
sdsl terminal [cpe | co]
NOTE:
To determine the current CO/CPE setting, enter shdsl terminal with no
parameters.
Parameters
***
cpe
co
Response
Terminal operation is displayed:
-> shdsl terminal
Customer Premises
Page 7-44
Enter the command with no parameter to display the current ter-
minal mode.
Sets the terminal operation mode to CPE.
Sets the terminal operation mode to CO.
®
Efficient Networks Router family
Command Line Interface Guide
Efficient Networks
®