System Securitytimer - Efficient Networks Router family Command Line Interface Manual

Chapter 4: System Commands
Input Format
system securemode set wan <trusted | untrusted>
Parameters
trusted
untrusted
a
Default value
Response
Typical response:
System WAN designation set to "UN-TRUSTED".

system securitytimer

Allows the user to change the 10-minute default security timer to another value. The
router automatically logs out a Telnet or console user out of privileged mode when no
typing has occurred for the length of time set for the security timer.
• To see the current security timer value, use the
• To disable the security timer, set the <minutes> value to 0.
Mgmt Class
Security (R/W)
Input Format
system securitytimer <minutes>
Parameters
<minutes>
a
Integer
Response
Command prompt.
Page 4-50
Allows unsecure sessions from the WAN when secure mode is en-
abled.
a
Only secure connections from the WAN are allowed when secure
mode is enabled.
a
Timer length in minutes.
®
Efficient Networks Router family
Command Line Interface Guide
system list command.
Efficient Networks
®