®
Efficient Networks
Router family
Command Line Interface Guide
ike ipsec policies set proposal
Defines a proposal filtering parameter value for the policy. The proposal parameter
specifies an IKE IPSec proposal that may be used for the connection. (It must have
been defined by IKE IPSec proposal commands; see
Commands" on page
Unlike the other filtering parameters, the policy may allow more than one value for the
proposal parameter. For example, two set proposal commands could specify two
proposals, either of which could be used by the connection; see
Commands" on page 5-61.
Mgmt Class
Security (R/W)
Input Format
ike ipsec policies set proposal <proposalname> <policyname>
Parameters
<proposalname>
<policyname>
a
ASCII string
b
To see the IKE proposal names, use the
c
To see the policy names, use the
Example
-> ike ipsec policies set proposal myproposal mypolicy
Response
Command prompt.
®
Efficient Networks
5-58.)
a
Name of an IKE proposal.
a
Name of the IPsec policy to which the proposal parameter value
c
is added.
ike ipsec proposals list
ike ipsec policies list
Chapter 12: IKE/IPsec Commands
"IKE IPSec Proposal
"IKE IPSec Policy
b
command.
command.
Page 12-17