®
Efficient Networks
Router family
Command Line Interface Guide
remote enaauthen
Initiates the target router authentication negotiation as defined in the remote router's
database.
Mgmt Class
Security (R/W)
Input Format
remote enaAuthen <remotename>
Parameters
<remotename>
a
ASCII string
Response
Command prompt.
remote enable
Enables use of an entry in the remote router database. Although the command makes
it possible to use the remote entry, it does not start an active session for the remote.
NOTE:
The entry remains enabled across reboots. The entry remains enabled until it is
disabled by a
Mgmt Class
Network (R/W)
Input Format
remote enable <remotename>
®
Efficient Networks
a
Name of the remote router.
remote disable
command.
Chapter 6: Remote Commands
Page 6-27