User Delete User - Efficient Networks Router family Command Line Interface Manual

Chapter 15: User Commands
Examples
In the following example, the user (Admin1) has read-write permission for the
privilege management class. The example below will delete the write permission and
make the user account read only for the privilege management class.
-> user delete class admin write Admin1
Deleted "ADMIN-WRITE" management class for user "Admin1"
In the following example, read permission for the voice management class is
removed, thus deleting the management class from the user account.
-> user delete class voice read Admin1
Deleted "VOICE-READ" management class for user "Admin1"
Response
See examples above.

user delete user

Deletes an existing user account from the management database. Deletion of multiple
user accounts is supported. To view a user account listing, use the command
NOTE:
The system must contain at least one enabled user account with privilege read and
write access. If only one admin acount exists, it cannot be deleted or disabled.
Mgmt Class
Admin (R/W))
Input Format
user delete user <username1> [<username2> <usernameN>]
Parameters
<username>
a
ASCII string. The username is case-sensitive.
Page 15-8
a
User account to be deleted.
®
Efficient Networks Router family
Command Line Interface Guide
Efficient Networks
user list.
®