Snmp Settrapenable - Efficient Networks Router family Command Line Interface Manual

Chapter 17: SNMP Commands
Input Format
snmp list
Parameters
None
Response
Typical response:
-> snmp list
SNMP CONFIGURATION INFORMATION
Community name....................... iads
Port................................. default (161)
IF Enabled........................... LAN only
Clients.............................. all
Global Trap Enable................... on
Configured Trap Destinations......... none

snmp settrapenable

Enables or disables transmission of unsolicited trap event messages to trap
destinations. To see the current Global Trap Enable setting, use the command
list.
NOTE:
This command does not require a reboot and is effective immediately.
Mgmt Class
Network (R/W)
Input Format
snmp settrapenable on | off
Page 17-8
®
Efficient Networks Router family
Command Line Interface Guide
Efficient Networks
snmp
®