Table of Contents
Advertisement
Chapter 4: System Commands
system delsyslogfilter
Deletes the Syslog address filter. To see the address range of the filter, use the
command
system
system
NOTE:
This command does not require a reboot and is effective immediately.
Mgmt Class
Security (R/W)
Input Format
system delsyslogfilter <firstipaddr> [<last ipaddr>] | lan
Parameters
<first ipaddr>
<last ipaddr>
lan
a
Dotted-decimal notation
b
May be omitted if the range contains only one IP address.
Response
Command prompt.
system delsyslogserver
Removes an address from the list of Syslog servers. To see the server addresses,
use the command
command system
NOTE:
The new server address becomes effective after a
Mgmt Class
Network (R/W)
Input Format
system delsyslogserver <ipaddr>
Page 4-34
system
list. To define a new Syslog address filter, use the command
addsyslogfilter.
a
First IP address of the range.
a
Last IP address of the range.
Local Ethernet LAN.
system
list. To specify a new Syslog server address, use the
system
addsyslogserver.
®
Efficient Networks
Router family
Command Line Interface Guide
b
save
and a
reboot
command.
Efficient Networks
®
Advertisement
Table of Contents
