Chapter 12: IKE/IPsec Commands
ike proposals set encryption
Sets the IKE proposal parameter that requests ESP encryption and specifies the
encryption method used. See
Mgmt Class
Security (R/W)
Input Format
ike proposals set encryption <des | 3des> <proposalname>
Parameters
Choose one of the following:
des
a
3des
<proposalname>
a
Software Option Key enabled feature
b
ASCII string
c
To see the proposal names in use, use the
Example
-> ike proposals set encryption des my_ike_proposal
Response
Command prompt.
ike proposals set lifetime
Sets the IKE proposal parameter that specifies the length of time (in seconds) before
the Phase 1 SA expires; the recommended value is 86400 (24 hours). When the time
limit expires, IKE renegotiates the connection. See
Mgmt Class
Security (R/W)
Input Format
ike proposals set lifetime <seconds> <proposalname>
Page 12-42
"IKE Proposal Commands" on page 5-58.
Use DES (56-bit) encryption.
Use 3DES (168-bit) encryption (if 3DES encryption is enabled).
b
Name of the IKE proposal to which the encryption parameter is
c
added.
ike proposals list
®
Efficient Networks
Router family
Command Line Interface Guide
command.
"IKE Management" on page 5-52.
Efficient Networks
®