Chapter 12: IKE/IPsec Commands
ipsec set gateway
Defines the IP address of the IP gateway of the IPSec SA.
Mgmt Class
Security (R/W)
Input Format
ipsec set gateway <ipaddress> <saname>
Parameters
<ipaddress>
b
<saname>
a
Dotted-decimal notation.
b
ASCII string
c
To see the IPSec SA names in use, use the
Example
-> ipsec set gateway 207.135.89.233 show_rx
Response
Command prompt.
ipsec set ident
Specifies the identifier (SPID) for the IPSec tunnel. It must match the SPID at the
other end of the tunnel, that is, the tx SPID on this end must match the rx SPID on the
other end.
Mgmt Class
Security (R/W)
Input Format
ipsec set ident <ident> <saname>
Page 12-54
a
IP address of the IP gateway.
Name of the IPSec SA to which the gateway parameter is added.
Efficient Networks
Command Line Interface Guide
ipsec list
command.
®
Router family
c
®
Efficient Networks