Remote Setbod - Efficient Networks Router family Command Line Interface Manual

Chapter 6: Remote Commands
Parameters
<protocol>
<remotename>
a
ASCII string
Response
Command prompt.

remote setbod

Sets the bandwidth on demand (BOD) management option for a DOD (dial on
demand) connection, that is, a connection where the link goes up and down. These
links include those for ISDN, L2TP tunnels, IPSec tunnels, and dial backup.
The bandwidth on demand management option can be set to apply to incoming,
outgoing, or both incoming and outgoing traffic. The bandwidth threshold set by the
remote setbwthresh
Mgmt Class
Security (R/W)
Input Format
remote setBOD
Parameters
in | out | both
<remotename>
a
ASCII string
Response
Command prompt.
Page 6-42
chap, pap, or none. The default is pap.
a
Name of the remote router.
command applies to the direction of traffic set by this command.
in | out | both
Incoming traffic, outgoing traffic, or both. The default is both.
a
Name of the remote router.
Efficient Networks
Command Line Interface Guide
<remotename>
®
Router family
®
Efficient Networks