Command Prompt - Efficient Networks Router family Command Line Interface Manual

Table of Contents

Advertisement

®
Efficient Networks
Router family
Command Line Interface Guide
Authentication level required........ PAP
. . . (subsequent lines same as for async) . . .
-> remote setPrefer async backup
-> remote list backup
INFORMATION FOR <backup>
Status............................... enabled
Our System Name when dialing out..... gwbush
Our Password used when dialing out... yes
Disconnect timeout (in seconds)...... 60
Min/max channels..................... 0/1
Interface in use..................... ASYNC
Protocol in use...................... PPP
Authentication....................... disabled
Authentication level required........ PAP
Bandwidth management criteria........ both
Use periodic LCP pings............... yes
1. ASYNC telephone number, speed 115200 9,5554218
2. ASYNC telephone number, speed 115200 9,5554219
1. HSD telephone number, speed auto
2. HSD telephone number, speed auto
Dial Back.............................off
Request PPP Call Back.................no
Response

Command prompt.

®
Efficient Networks
Chapter 6: Remote Commands
Page 6-61

Advertisement

Table of Contents
loading

Table of Contents