Eth Ip Addserver - Efficient Networks Router family Command Line Interface Manual

Chapter 5: Ethernet Interface Commands

eth ip addserver

This Network Address Translation (NAT) command adds a server's IP address (on
the LAN) associated with this interface for a particular protocol. For more information,
see "Network Address Translation (NAT)" on page 4-17
Guide.
To delete a server designation, use the command
Mgmt Class
Network (R/W)
Input Format
eth ip addserver <action> <protocol> <first port> [<last port>
[<first private port>]] <interface>
Parameters
<action>
<protocol>
<first port>
a
Dotted-decimal notation
b
Integer
c
Integer, 0 - 65,535
Page 5-10
One of the following command actions:
a
Selects the host with this IP address as
<ipaddr>
server.
Discards the incoming server request.
discard
Sends the incoming server requests to
me
the local router, regardless of the IP ad-
dress.
Protocol used by the selected server.
b
Numerical protocol ID.
<protocolid>
TCP only.
tcp
UDP only.
udp
All protocols.
all
First or only port as seen by the Ethernet interface. Port
used by the selected server.
c
Numerical port value; a value of 0
<portid>
matches any port.
File Transfer Protocol (FTP) port.
ftp
H.323 port.
h323
Hypertext Transfer Protocol (HTTP)
http
port.
®
Efficient Networks
Command Line Interface Guide
of the Technical Reference
eth ip delserver.
Efficient Networks
Router family
®