System Passwd; System Riptimer - Efficient Networks Router family Command Line Interface Manual

Chapter 4: System Commands

system passwd

Sets the system authentication password for the target router that is used when the
router connects to other routers or is challenged by them. This password is a default
password used for all remote sites unless a unique password is explicitly defined for
connecting to a remote router with the
Mgmt Class
Security (R/W)
Input Format
system passwd <password>
Parameters
<password>
a
ASCII string
b
The password is case-sensitive and should be no more than 40 characters.
Response
Command prompt.

system riptimer

Sets the duration, in seconds, for Routing Information Protocol (RIP) information to be
exchanged with remote routers. For additional information on RIP, refer to the
Technical Reference Guide and see
Mgmt Class
Network (R/W)
Input Format
system riptimer <seconds>
Parameters
***
<seconds>
a
Integer, minimum 15 (30)
Page 4-46
a,b
Authentication password of the target router.
When entered with no parameter, the current setting is displayed.
a
Timer value for RIP information exchange.
Efficient Networks
Command Line Interface Guide
remote setourpasswd
"RIP Controls" on page 6-4.
®
Router family
command.
Efficient Networks
®