Remote Unbindipvirtualroute - Efficient Networks Router family Command Line Interface Manual

®
Efficient Networks Router family
Command Line Interface Guide

remote unbindipvirtualroute

Removes a remote route from the named IP virtual routing table.
To list the remote routes, use the
route, use the remote
NOTE:
A route change in an IP virtual routing table takes effect immediately. However, the
change is lost if it is not saved before the next remote restart or reboot.
Mgmt Class
Network (R/W)
Input Format
remote unbindipvirtualroute <ipaddr> <tablename> <remotename>
Parameters
a
<ipaddr>
<tablename>
<remotename>
a
Dotted-decimal notation
b
ASCII string
Example
The following command removes a route from virtual routing table FRANCISCO. The
route removed is for IP address 10.1.2.0 and remote router HQ.
-> remote unbindIPVirtualRoute 10.1.2.0 FRANCISCO HQ
Response
Command prompt.
®
Efficient Networks
remote listiproutes
remote bindipvirtualroute
IP address of the remote network or station.
b
IP virtual routing table to which the route is removed.
a
Name of the remote router.
Chapter 6: Remote Commands
command. To add a remote
command.
Page 6-71