Dsp Jitter - Efficient Networks Router family Command Line Interface Manual

Chapter 13: Voice Commands

dsp jitter

Adjusts the size of the jitter buffer for all voice ports.
CAUTION:
Setting the jitter buffer to a value less that the default (15 milliseconds) may cause
degradation of voice quality.
NOTE:
Prior to changing the jitter buffer size, cease any active calls and close all data
transfers.
Mgmt Class
Voice (R/W)
Input Format
dsp jitter <milliseconds>
Parameters
***
<milliseconds>
a
Integer, 0 - 60 (15)
Example
The following command example will change the jitter buffer size to 20 milliseconds.
-> dsp jitter 20
Response
Typical response when entered with no <milliseconds> parameter.
-> dsp jitter
Jitter Buffer: 15 ms
Page 13-4
When entered with no parameter, the current jitter buffer value
is displayed
a
Optional, Length of jitter buffer in milliseconds.
®
Efficient Networks Router family
Command Line Interface Guide
Efficient Networks
®