®
Efficient Networks
Router family
Command Line Interface Guide
system sshport
Specifies the port that the SSH server listens on.
Mgmt Class
Security (R/W)
Input Format
system sshport <port>
Parameters
default
disable
a
<port>
a
Integer, 1 - 65525 (22)
Examples
This command sets the SSH port to the default value (22)
-> system sshport default
This command disables the existing SNMP port.
-> system sshport disabled
This command remaps the SSH port to port 1320.
-> system sshport 1320
system supporttrace
Provides the ability to capture to a file all the configuration data that Technical Support
may need to investigate configuration problems. This exhaustive list command
incorporates the following commands:
•
system history
•
vers
•
mem
•
system list
•
eth list
•
dhcp list
•
remote list
®
Efficient Networks
Restores the SSH port value to the default value 22 and re-
enables the port.
Disables the existing SSH port.
Defines a new SNMP port number. Use this option to restrict
remote access.
(if DHCP is enabled)
Chapter 4: System Commands
•
ifs
•
isdn list
•
pots list (if this is a POTS device)
•
(if bridging is enabled)
bi
•
ipifs
•
iproutes
•
ipxroutes
Page 4-55