Eth Ip Addr; Defines The Ip Address And Subnet Mask For An Ethernet Port Or Logical Interface - Efficient Networks Router family Command Line Interface Manual

Chapter 5: Ethernet Interface Commands

eth ip addr

Defines the IP address and subnet mask for an Ethernet port or logical interface.

Mgmt Class
Network (R/W)
Input Format
eth ip addr <ipaddr> <ipnetmask> [<interface>]
Parameters
<ip addr>
<ipnetmask>
<interface>
a
Dotted-decimal notation
b
This parameter may be omitted if the router has only one Ethernet interface.
If the router has two physical Ethernet interfaces (an Ethernet hub router), the port number (0 or 1) must
be specified.
c
To specify a logical interface other than logical interface 0, specify both the port number and the logical
interface number (<port #>:<logical #>, for example, 0:1).
Example
The following command sets the IP address and subnet mask for the default Ethernet
interface (0:0):
-> eth ip addr 192.168.1.254 255.255.255.0
The following command sets the IP address and subnet mask for logical interface 1
on Ethernet port 0:
-> eth ip addr 10.0.27.1 255.255.255.0 0:1
Response
Command prompt.
Page 5-8
a
Ethernet LAN IP address.
a
IP network mask.
b,c
Ethernet interface.
®
Efficient Networks Router family
Command Line Interface Guide
Efficient Networks
®